According to the user’s environment, LED electronic screen can be divided into wall hanging, cantilever, inlay, keel, bracket, roof, mobile, stadium fence, rental hoisting, arc and other installation methods. 1. Wall mounted installation method
1) This installation method is usually used indoors or outdoors
(2) The display area of the screen is small, so the full screen is usually deleted for maintenance, leaving no space for maintenance channel, or it can be made into a foldable overall frame
(3) The screen area is slightly larger, and it usually adopts forward-looking maintenance design (i.e. front-end maintenance design, which usually adopts hot assembly)
2. Column installation method
There are many ways to install columns, which are usually used for outdoor advertising.
1) Single column installation method: suitable for small screen applications
2) Double column installation method: suitable for large screen applications
3) Closed maintenance channel: suitable for simple cases
4) Open maintenance access: for standard boxes
3. Cantilever installation method
1) This method is widely used indoors and outdoors
(2) It is generally used for passageway and corridor entrance, and also includes station, railway station and subway entrance. (
(3) It is used to induce traffic on highways, railways and expressways
4) Screen design usually adopts integral cabinet design or hoisting structure design
4. Suspension installation method
This installation is almost similar to cantilever installation, and is an integral cabinet design suitable for indoor and outdoor screens
5. Mosaic installation method
(1) The whole LED electronic screen is embedded in the wall, and the display plane is on the same floor as the wall
2) Use simple box design
3) Typically, proactive maintenance (total maintenance design)
4) This installation method is used for both home and outdoor, but it is usually used with small dot pitch, and the screen size is not large
5) It is often used in building entrance, building hall, etc
6. Standing installation method
1) Generally, the integrated cabinet design is adopted, and the sectional combination design is also adopted
2) Indoor small distance specification screen
3) The display area is usually small
4) Main typical application led tv design
7. Roof type installation method
1) This installation method is the key to the wind resistance
2) It is usually installed at an inclined angle, or the module is designed with a slope of 8
3) Commonly used in outdoor advertising display
8. Installation method of football field fence
The viewing angle of the screen body can be adjusted according to the tilt adjustment of the support frame, which is designed as a soft silicon mask and a soft arc top, so as to prevent the injury caused by sports collision.
9. Rental hoisting method
The size of the indicator screen is determined by the normal screen. The hoisting picture should not be too large. The general requirement is 6m * 10m or less. Special cuboid materials and bar curtains are exceptions. The top is the suspension beam and the bottom is the bottom beam. The lifting beam is used for lifting. The cable and the cable box are connected by the hoisting mechanism, and the lock tension between the horizontal boxes is reduced. Key points of hoisting mechanism: gear, taper rod and bolt. Under the condition of more expensive, more reliable, and the most expensive, the most expensive, and the most difficult to disassemble and assemble. 10. Arc installation method
11. Truss moving installation method
1) The LED electronic screen can be moved in real time according to the actual needs
2) The main body of the mobile LED electronic screen moves on and off according to the display screen and the scene
3) Guide to truss design
4) Generally used for stage background LED electronic screen, mostly used for radio stations, concerts, etc
