We know that every LED display enterprise must develop an LED display plan for users to refer to before the production of LED displays is completed and put into use. Նմանապես, a detailed plan should be developed for renting LED display screens.
LED Display Screen Solution – Precautions for Selection:
Outdoor display screens are waterproof, փոշոտակայուն, and corrosion-resistant, while indoor display screens are not waterproof and have much lower brightness than outdoor ones (note for rental screen customers).
2. The number of the model represents the physical spacing size of the LED beads on the unit board (for the same area and distance, the smaller the number, որքան պարզ է դա).
3. Before choosing a suitable model, several factors should be considered, including the height of the screen from the ground, the distance from the audience, and the actual screen area to be made.
4. The P10 model display screen is suitable for screens with an area of less than 30 քառակուսի մետր. The best viewing effect is at a distance greater than 10 meters but less than 200 մետր. The physical spacing between the lights on the P10 display screen is 10 millimeters, and there are 10000 sets of light beads in one square meter area. The best viewing effect is around 40 մետր.
LED Display Screen Solution – Appearance and Structural Features:
A New material: The unit box of the LED display solution is made of specialized steel profiles.
B Good rainproof performance: Four sealing structures are added to the design of steel profiles. Except for one which uses a dedicated sealing strip, the other three adopt the form of diversion grooves to prevent rainwater from entering the box.
C High dimensional accuracy: The geometric shape and dimensional design deviation between the boxes is only 0.02 millimeters, so the unit box sizes are almost the same. After assembly, the gaps are even, and all unit boxes of the LED display screen scheme are on the same elevation. Հետևաբար, the entire screen is very flat and the effect is good.
D Easy installation: Both the box and the outer frame, as well as the connection between the unit boxes, are connected using front and rear specialized steel plates with bolts. The signal and power connections between the boxes are all connected using waterproof aviation plugs, and the LED display solution is easy and fast to operate, with higher stability.