Car led full-color screen is installed in the car. Compared with ordinary door screen and fixed indoor LED display, it has higher requirements for volatility, shock prevention and dust prevention. So, what are the installation points and precautions of car led full-color screen?
Preparatory tasks before installation of on-board LED display screen:
1. Technical training: in the process of screen consumption, customers can send people to consumer manufacturers to learn LED display operation and complex spare parts replacement technology.
2. The signing of the steel frame plan will stop around a week. The engineer will plan the steel frame structure according to the site conditions and the practical situation of the vehicle led full-color screen, and hand it over to the construction party. The construction party can purchase relevant materials according to the drawings and plan the steel structure manufacturing after obtaining the steel frame structure drawings (CAD drawings).
3. The first step in the installation process of vehicle LED display screen is to make a reasonable combination of the installation site and the screen.
4. In the later stage of installation, the power consumption of the screen and the size of the distribution cabinet of the equipment must be planned. The consumer manufacturers of the on-board LED display will calculate the actual power consumption according to the actual situation of the screen, and give it to the construction party.
Vehicle LED full color screen is officially installed:
5. Fourth, for the installation of on-board display screen, customers can understand the construction of steel structure. Generally, they don’t understand much about the wiring and splicing of on-board LED display screen, so they usually need to stop under the guidance of professional engineers, and they need the ultimate screen operator to participate in order to understand more about the screen;
6. Sixth, screen maintenance: when the LED screen is being debugged, a set of LED display module may be damaged occasionally. At this time, the engineer is required to stop the on-site maintenance or replace the spare parts;
7. LED screen debugging: at the end of the installation, the technical staff of the consumer manufacturers are required to test the whole screen before it can be powered on and connected to the computer to stop the control of the screen;
Attention to the installation of vehicle LED display screen:
Wiring: the power line is divided into lamp line (red black line or brown blue line), screen power line (brown blue line) positive, white or brown line; negative, black or blue line
1. The power supply of the screen body can be connected to the fuse of the thought, and the front of the screen body can be connected to the brown wire (positive pole), (the blue wire is connected to the negative pole of the iron casting place of the whole car). There is also a lamp wire on the ceiling lamp screen to go together with the lamp wire of the whole car, so that the lamp can be on its own initiative at night. This is for taxi customers
When the LED display screen is connected to the power supply on the vehicle, the two ends of the wiring must be soldered and covered with insulating plastic. The best way to route the line is to route the cable slot. It should not be on the seat, so as not to scratch the line when moving the seat and cause the screen short circuit.
The display screen and the fixed tripod must be tightened. It is better to join the spring gasket. The installed display screen must be stable and can’t shake!
Installation points of vehicle LED full color screen
